About Us
For more than 45 years, Skip Barber Metal Works has been turning ideas into reality through craftsmanship, creativity, and a passion for building things that stand apart. Our team has designed and fabricated everything from race cars and custom vehicles to restorations, one-of-a-kind artwork, specialty displays, and unique fabrication projects. Rooted in decades of motorsports experience, we bring the same attention to detail, precision, and problem-solving to every project we take on. Whether restoring a classic, building a purpose-built vehicle, or creating something that has never existed before, Skip Barber Metal Works combines traditional craftsmanship with modern fabrication capabilities to deliver truly custom work.
Our Builds
The Boarshead BBQ
Every inch of this build started as a blank screen in 3D CAD — and ended as a fully functional, show-stopping machine. Our team engineered the entire vehicle from the ground up, including a custom scissor-lift body that rises over 12 feet in the air, transforming into a three-sided billboard and revealing a complete stainless-steel kitchen: five-burner grill, steam trays, cold draws, dual refrigerators, and a smoke-extraction system that vents through polished chrome stacks ten feet skyward.
Nothing was off-the-shelf. The chassis was designed and fabricated from scratch, with every component CNC shape-cut, machined, and bent before being hand-finished. The cab features hand-fabricated mirrors, a CNC-cut polished grille, and illuminated stainless guide poles, topped with a mini refrigeration unit. Inside, a full hydraulic system commands steering, drive, and body lift, powered by a gas engine driving an eight-wheel hydraulic drivetrain.
Rain-ready fold-out panels double as awnings. Every surface, from the food-grade stainless kitchen to the polished wheel covers and trim, was T.I.G. welded and finished by hand.
This is what happens when precision engineering meets real craftsmanship: a rolling showpiece designed to turn heads and run flawlessly, event after event.

The White Truck
This 1971 White HD 240 came to us as it was born, a stock 305ci V8 hauling a stake body under a three-speed automatic. We kept the cab and rebuilt everything else from the ground up.
The chassis was designed and fabricated from scratch on a custom 4-link front and 6-link rear suspension. We relocated the engine behind the cab, "under glass," and dropped in an LS3 450HP backed by a 6-speed push-button 6L80 transmission, paired with an F53 front end and a re-engineered F450 rear, both on matching 10-lug hubs. Air suspension at all four corners is managed by a Bluetooth-enabled Accu-Air system for full electronic ride-height control.
Inside, a custom dashboard and overhead console house Vintage Air A/C, Digital Dakota gauges, tilt steering, and billet aluminum CNC-machined trim, with power windows hidden behind vintage-style handles.
The showpiece is a custom car-carrier flatbed with a glass-covered cutout that puts the LS3 on full display, even with a car loaded on the bed. The engine bay's billet aluminum frame was CNC-machined from a single block, with LED lighting to show off the engine at night. Taillights sit flush in the bed so vehicles can drive right over them, backed by a rear camera and a military-grade 15 CFM air compressor.
Every component, from wire channels to weatherproof boxes, was CNC water-jet cut, laser cut, bent, and machined, then powder coated for a finish as tough as it is clean. In total, more than 1,400 custom parts turned a retired hauler into a one-of-a-kind rolling exhibition.

The Helmet Car
This helmet car began life as a 1,000-gallon propane tank, hand-cut with a plasma torch into shape. We fabricated a custom steel-and-brass mohawk, and engineered the visor to serve as both windshield and entry door, hydraulically lifted with a manual nitrogen-spring override for safety.
The helmet carries over 300 hand-pounded rivets, each hand-forged from a steel bolt, welded shut, then hammered into shape while glowing hot. Inside, an aircraft-style overhead panel and a custom tilt steering column with a linear actuator put every function within reach, alongside a center-floor gauge tower.
The snake headers are hand-fabricated with 996 laser-cut scales apiece, CNC laser-cut eyes, and hand-shaped jaws and fangs, each rigged with an internal nitrous purge system that fires flame from the snake's mouth. Every header took forty hours to build.
The chassis was fabricated from rectangular steel with CNC-cut plates at every seam and hand-hammered rivets, riding on a three-link rear suspension with medieval-style shape-cut links. Out back, a functional cannon serves as the trunk, complete with a cannonball trunk lid.
Power comes from a stroked small block with a blower and nitrous system, backed by a Turbo 400 transmission. Both gas tanks are hand-fabricated with welded stainless steel scales and built-in pockets for the nitrous bottles. All four wheels are custom too, with axe-shaped centers CNC laser-cut and machined to spin true.








